LAB/SM SERIES The LAB/SM range offers DC outputs of 0V to 300V and 0A to 300A in various configurations form 1kW to 12kW. The extremely compact 100kHz Mos design allows 1kW per 1U case height. All LAB/SM units have a PFC of 0.98. All units in the series are available with an optional interface for RS232 and/or GPIB. Units above 4.5kW are supplied with a 3 phase input which is also available as an option on units below 4.5kW in power. LAB/SM units can be operated in constant current (CC) or constant voltage (CV) modes. A LabView driver is available for the LAB/SM series to help with integration in to automated test sequences or ATE systems. The units can be used as bench supplies but are equally suited for rack mounting. A list of available output configurations can be found in the LAB/SM series PDF
LAB/SM SERIES PDF
LAB/TC SERIES The LAB/TC range offers units with up to 2kV DC output and power up to 2MW in blocks of 10kW, 16kW, 20kW and 32kW. The series offers extremely compact designs with 32kW available in a 9U high unit. Regulation is a unique fully digital system. Units can be operated in constant power (CP) mode as well as constant voltage (CV) and constant current (CC). Units may be operated in series or in parallel for increased voltage or current. Standard supply includes LabView and operational software.
The basic unit has analogue and RS232 interfaces, options include manual front panel controls, RS422, IEEE (GPIB), remote manual control panel, all industry standard bus protocols, liquid cooling, built in function generator option with arbitrary function generation software.
LAB/TC SERIES PDF
LAB/HP SERIES THE NEW LAB/HP SERIES can supply up to 15kW of power in just a 3U high case. The active parallel mode enables up to 6 identical units to be operated together providing an output of up to 90kW. The high visibility LED display and 10 turn potentiometers allow for straightforward front panel operation. Voltage & current values can be preset and read prior to releasing the output. RS232 and 0 - 5VDC analogue interfaces are built in as standard. 0-10 VDC, RS485, GPIB, USB and CAN interfaces are optionally
ETPS are able to offer a vast array of bench and rack mounting DC power supplies as well as offering excellent custom solutions. If your requirement falls outside of the four ranges shown above then please Contact Us with your requirements and we will be more than happy to advise you on a potential solution.
AP REPLACEMENT SERIES ETPS in partnership with Caltest are now offering a range of units that are suitable as replacements for the discontinued AP series of autoranging power supplies which were manufactured by Farnell Instruments, Wayne Kerr Electronics and HiTek Power. So if you have an AP series units that requires replacement or if you require additional units then please contact us with the AP model number and we will provide you with pricing and technical data on the ETPS equivalent.
available. The LAB/HP's compact design delivers high efficiencies of up to 94%. Adjustable internal resistance and optional car starting curves make this range ideal for automotive simulation as well as general laboratory and production work. LabVIEW Drivers and ATE options are offered for system integration. Fused output terminals on the front panel are useful for low power operation enabling up to 10A to be taken. ET's legendary flexibility allows non-standard outputs and customer specific options to be provided ensuring the LAB/HP is suitable for the widest variety of applications.
LAB/HP SERIES PDF
