01483 302 700

sales@caltest.co.uk

Ballantine Laboratories Image 1
contact

ENQUIRE NOW

Ballantine Laboratories

BLI 1605B

The BLI 1605B AC/DC Thermal Transfer Standard is a highly accurate true-rms multi-ranging ac measuring instrument. It serves as a laboratory standard against which to compare all precision ac instruments. It can provide absolute transfer measurements to within 20 ppm to 20 kHz, and is the only transfer standard with a frequency range to 100MHz.


Key Features:

  • Precision, true RMS measurement with accuracy traceable to NIST of typically less than 20 ppm
  • High Repeatability
  • Accurate Measurements from 10 Hz to 100 MHz (usable to 250 MHz)
  • Computer control for automatic testing and report generation
  • Shorter test time through simpler operation


Frequency Range: DC, 10 Hz to 100 MHz; usable from under 5 Hz to over 250 MHz.

Voltage Ranges:  DC and AC RMS (overrange +10% , underrange -10%; 225 mV min. ,1100 V max.)

Crest Factor: 100:1 of full range; 450 V pk max. on Low Voltage Input, 1500 V pk. max. on High Voltage input.

Input Overload: Fully protected at all frequencies to 10 x range to 1100 V (dc + ac rms sinusoidal) applied continuously; overload puts unit in standby mode, which disconnects input signal from thermo-element until overload is removed.

Input Impedance: 200 Ohms/Volt.

Input Isolation: Connectors may be floated 25 V ref. to case ground.

Operating Modes:
Manual Balance: Operator manually null balances the transfer standard in either the normal AC input to DC output mode or the inverse DC to AC transfer to permit setting input AC signal to a precise DC level.

Automatic Balance: AC to DC transfer performed only after input signal rms amplitude drift is verified as less than the following:
AUTO HI ACCURACY mode - 10 ppm within 40 s
AUTO NORM mode - 20 ppm within 20 s
AUTO FAST mode - 40 ppm within 15 s

Manual Transfer: Balance is automatic in the AC input mode, but operator initiates transfer to DC output based on null meter reading.

Auto-Recycle: Repeats transfer measurement cycle approximately 15 s after each output READ command: Auto-Recycle is an auto-zero mode, which avoids errors due to thermal drift.

DC Output: Internally generated DC +0.225 to 1100 V (10 Megohms load) and averaged by external voltmeter for 10 seconds following the READ command; ripple and noise 95 dB below DC output amplitude or 100 mV, which ever is greater; maximum output current 2 mA.

READ Command: Sent over IEEE-488 bus to trigger external voltmeter to read transferred DC output after transfer standard DC output has settled; front panel READ light indicates command.

Interface Bus: IEEE-488 1978.
Functions - SH1, AH1, T10, LEO, T5, L4, SR1, PP0, RL1, DC1, DT0, C0
Bus Controls: Range (12), Balance Mode (5), Operate, Standby Recycle (3), Measure Input, Measure Output.Isolation: Opto-isolated from measuring circuits; bus digital ground connected to case.

Environmental: Complies with MIL-T-28800, Class 5 for shock, vibration, transit drop, humidity to 90%, R.H. non-condensing; temperature 0 to +50 C operating(+ 10C to +40C full specifications) and -40C to + 75C storage; altitude 3000 m operating with storage to 15,000 m; fungus resistant; EMI protected.

Power: 100, 120, 220 and 240 V ac, +8% to-10%; 50 to 400 Hz; 80 VA

Contact:

Caltest Instruments Ltd

4 Riverside Business Centre

Walnut Tree Close

Guildford

Surrey GU1 4UG

United Kingdom

Tel: +44 (0) 1483 302 700

Fax: +44 (0) 1483 300 562

Email: sales@caltest.co.uk

PROUD SPONSORS...

Sponsor Logo

Caltest have been providing power sources and test instrumentation solutions for over 17 years and are proud to represent a number of industry leading manufacturers.

Footer Logos