01483 302 700

sales@caltest.co.uk

Kepco Power Image 1
Download contact

ENQUIRE NOW

Kepco Power

BOP-HV Series

The Kepco Model BOP 500M and BOP 1000M are high voltage power sources, up to 500V or 1000V, respectively. These combine the capabilities of fast programmable power supplies with a Class A output stage, which can respond bidirectionally from zero. The BOP-HV can be operated in either a "voltage stabilizing" or "current stabilizing" operating mode (selectable by a front panel switch). These power supplies offer ultra low noise and ultra low ripple at the output.

For lower voltage, higher current applications, Kepco's Series BOP is available in 100W, 200W and 400W sizes.


Key Features:

  • 40 watts, linear 4-quadrant operation.
  • FET output stage.
  • Preamplifiers for summing and scaling arbitrary input signals.
  • Wide bandwidth.
  • Voltage and current stabilization with automatic crossover to current and voltage limits.
  • The BOP-HV incorporates two separate control channels, for local (front panel) or remote control of the output current and the output voltage. In addition, bounding currents for bipolar voltage and current limiting are provided which may be adjusted manually (by front panel controls) or can be remotely programmed. All control and bounding channels are connected to the bipolar (Class A) output stage via an "EXCLUSIVE-OR" gate, so that only one circuit is in control of the BOP-HV at any one time.
  • The amplifier in each channel is controlled via a zeroable preamplifier offering a minimum of 20,000 volts per volt open loop gain. These preamplifiers may be unstrapped and used as uncommitted amplifiers for signal scaling and summing. With their internal input/feedback elements, they function as unity gain inverting amplifiers driven by either the panel-mounted zero center controls, or an external -10V to +10V signal applied through the front panel binding posts. Their terminals are accessible at the rear for operational control with external feedback.
  • All rear programming and flag connections are made through a 30-terminal plug which can be wired for various control functions. To realize the full high speed potential of the BOP-HV, the load characteristics should be mainly resistive. Load capacitance and inductance up to 0.01F and 0.5 mH, respectively, can be tolerated without performance deterioration.
  • Remote programming of voltage, current or both channels by external analog volage. Kepco's SN 488 Digital Programmer facilitates digital programming via GPIB interface.


Model Power (W) Output Voltage(V) Output Current (A)
BOP 500M 40WATT 500V 80mA
BOP 1000M 40WATT 1000V 40mA

Contact:

Caltest Instruments Ltd

4 Riverside Business Centre

Walnut Tree Close

Guildford

Surrey GU1 4UG

United Kingdom

Tel: +44 (0) 1483 302 700

Fax: +44 (0) 1483 300 562

Email: sales@caltest.co.uk

PROUD SPONSORS...

Sponsor Logo

Caltest have been providing power sources and test instrumentation solutions for over 17 years and are proud to represent a number of industry leading manufacturers.

Footer Logos