7040 – Digital Pressure Calibrator – Time Electronics
Test and Measurement
The 7040 is a portable Digital Pressure Calibrator suitable for workshop, laboratory and field use. With the capability to measure process loop current and pressure, devices such as transmitters and converters to be calibrated directly. Basic accuracy is 0.04%. Pressure can be displayed in any of nine popular engineering units; Bar, PSI, KPa, inWg, cmWg, inHg, mmHg, Kg/cm2, and Atm.
Loop current can be displayed in mA, or as a percentage of span (4-20mA). A min/max logging function (pressure or loop current) is provided.
The min or max values can be recalled to the display and if required can be viewed in real time. An additional feature is leak rate display. This allows the actual leakage rate to be observed in real time in the selected ‘pressure units’ per sec, or per min.
By connecting the 7040 to a PC or laptop via RS232 and using a suitable program (see EasyCal calibration software) the displayed parameters can be read back: Pressure, Loop Current, Max Value, Min Value. By arranging for the program to store these values in a database a full data logging set-up is possible.
The display is 4.5 digit LCD and power is via a 9V PP3 battery. The 7040 is supplied with pneumatic fittings kit and hose, test leads, technical manual, RS232 lead, and carry case.
- Vacuum to 20bar versions
- 0.04% accuracy
- Loop current calibration
- 9 engineering units
- Min / Max function
- Leak rate function
- RS-232 serial interface