LP1 – Frequency Converter – Magnus Power

Power Products

Output frequency can be set to any value between 45Hz and 1kHz. Output voltage is variable from zero to maximum in two ranges, usually 0-135V and 0-270V. Output current capability is doubled on the lower range.

Control of the unit is all touch button interface, with a clean concise LCD screen. The values chosen by the operator are stored by the microprocessor when the converter is switched off, and are available for immediate use on future occasion. Values can be adjusted at any time whilst live online or offline.

The output is a pure sine wave, and is fully protected against over current conditions. In addition to the built-in output protection.

The LP1 can be supplied with an RS232 remote connector which can be connected to any PC operating on a windows platform allowing full control of the unit remotely.

This unit is available in a 19” rack mounting version or a bench unit.


115V or 230V Single Phase, +10% / -6%,
with automatic selection of voltage
45-66Hz (400Hz to special order)


45-1kHz in steps of 1Hz
Accuracy +/- 0.1Hz
Low Range 0-135V, 7.4A max
High Range 0-270V, 3.7A max