RXS Series Dielectric Strength Testers (Sefelec)
Test and Measurement
The RXS Series dielectric strength testers easily carry out hipot tests according to the VDE, UL, CSA standards and to the main EN European standards involved in the LOW VOLTAGE DIRECTIVE (LVD).
The RXS is a dielectric strength tester with AC only and DC for the RXS56 and RXS506 versions.
Together with the FMG rack, the RXS performs also leakage current measurement under nominal voltage, and power measurement, for single phase equipment as well as three phase equipment.
Key Features RXS Series Dielectric Strength Tester:
- Dielectric strength tester from 0 to 5 kVAC and 0 to 6 kVDC (RXS56, RXS506 models).
- 8 test step sequences.
- 50 parameter Sets Storage.
- Built in RS232C Interface.
- ETHERNET, PLC or IEEE4882 Interfaces on Option.
|Model||Dielectric strength / Hipot test
|Dielectric strength / Hipot test
|RXS50 Hipot tester||5kV||No||10mA AC|
|RXS56 Hipot tester||5kV||6kV||10mA AC
|RXS500 Hipot tester||5kV||No||110mA AC|
|RXS506 Hipot tester||5kV||6kV||110mA AC